THIS PACK CONTAINS 1 BELT
The old drive belts for these units perished badly over time and either dry out and snap, or degrade to a sticky mess around the drive motor pulley. In most cases the fix for a non-working drive is a thorough clean and a drive belt replacement.
These high quality (German made) belts are of identical design and size to the originals but newly made from modern more resilient materials. They are not the cheap, terrible quality things from the Chinese belt bundles so widely available now.
These belts will also fit the Amstrad CPC 664, 6128 & 6128 Plus internal disk drives.
They are also suitable for the Amstrad PCW machines which have the 3" drives (all but the PCW 9512+) and the Sinclair Spectrum +3.
Important - before fitting the new belts, make sure that all traces of the old belts have been removed from the drive motor capstan and pulley wheel with Cassette / Disk Drive Head Cleaning Fluid available in our eBay shop. Residues of the old, worn belts can caused the new belts to slip and/or "ride up" and come off the pulleys.
