THIS PACK CONTAINS 2 BELTS - TWO MAIN DRIVE BELTS ONLY. IF YOU REQUIRE THE TAPE COUNTER BELTS AS WELL, THESE ARE AVAILABLE AS A 2 BELT SET IN OUR SHOP.
Please note - these belts ARE NOT suitable for the CPC 464 PLUS model. These are available as a separate listing in our eBay shop.
The cause of poor loading performance from these cassette units is often a perishing drive belt becoming slack, or more commonly kinked where it has sat without moving around the drive pulley for 30 years or so. This kink then becomes a permanent feature of the belt causing it to jump and slip.
The tape counter belts don't usually snap or degrade, but can slacken off over time and may start to slip.
The belts supplied are brand-new replacements, as close as is possible to the design and size of the originals, but made from modern, more resilient materials. They have been tested extensively on this machine and work perfectly.
Manufactured in Germany, they are of premium quality. They are not the cheap, terrible quality things from the Chinese belt bundles so widely available now.
