These leads are not that easy to get hold of now and the "made up" versions tend to give a low quality or unreliable signal.

This lead is a 1.2M brand new, factory sealed lead and will give a clear and steady picture.

The cause of poor loading performance from the +2 range of Spectrums is often due to stretching and wear of the tape mechanism drive belt.
The old belts perished over time, particularly when stood unused for many years when they would often develop a "kink" where the belt rested unmoved over the capstan. This kink becomes a permanent feature in the belt causing it to jump when the drive is used again.

These square section belts are of identical design and size to the originals but made from modern, more resilient materials.

The cause of poor loading performance from the +2 range of Spectrums is often due to stretching and wear of the tape mechanism drive belt.
The old belts perished over time, particularly when stood unused for many years when they would often develop a "kink" where the belt rested unmoved over the capstan. This kink becomes a permanent feature in the belt causing it to jump when the drive is used again.

These square section belts are of identical size to the originals (although slightly thicker) but made from modern, more resilient materials.

The cause of poor loading performance from the +2 range of Spectrums is often due to stretching and wear of the tape mechanism drive belt.
The old belts perished over time, particularly when stood unused for many years when they would often develop a "kink" where the belt rested unmoved over the capstan. This kink becomes a permanent feature in the belt causing it to jump when the drive is used again.

These square section belts are of identical design and size to the originals (the small belt is slightly thicker) but made from modern, more resilient materials.

Often seized and then quickly burned out when a +2 hasn't been used for 20+ years.

Fully tested an working replacement drive motor

A common problem with a Spectrum +2 these days is poor loading performance from the built-in cassette deck.
This is a complete service kit for the Spectrum +2 complete with new belt, head cleaning solution, chamois leather cleaning tool for the read/write heads and full three page fully illustrated instruction manual.
All you need (except basic tools) to service the cassette deck of your +2 and restore it's original performance.

The manual is easy to read and understand with clear step by step photographs.

In excellent condition, this power supply is new and unused "old stock".  Because of its age it has been tested  and the output voltage is correct and stable.

Can also be used for 16K, 48K, Spectrum+ and Spectrum+ 128, but not for the Spectrum +2A or +2B (black models)