Sinclair Peripherals Sales
!
!
!
Multiface 3 for the Sinclair ZX Spectrum +3
Weight: gKG
Larger picture 

Multiface 3 by Romantic Robot for the Sinclair ZX Spectrum +3

Fully tested and working and complete with full documentation reproduced from the original manual from Romantic Robot.
Considered the ultimate add-on for the Spectrum +3, the Multiface 3 was the only realistic way of reliably transferring tape software for the Spectrum onto disk for the +3.  I
t provides fully automatic & universal back-up/transfer of 48K/128K programs from tape to disk, disk to disk, tape to tape and disk to disk.
Also has a comprehensive toolkit to study/modify develop software, hack for extra lives etc etc.

Easy to use - just plugs into the expansion port of the +3 and operates at the touch of a button.

Multiface 3 Full Copy Kit for the Sinclair Spectrum +3
Weight: gKG
Larger picture 

Full Multiface 3 Copying / Backup Kit for the Sinclair ZX Spectrum +3

A full copying/backup kit for the Spectrum +3 comprising a fully tested and working Multiface 3, special leads for connecting a tape recorder to the +3, 10 blank, formatted 3" disks and full documentation reproduced from a compilation of all the original manuals from Romantic Robot.
Considered the ultimate add-on for the Spectrum +3, the Multiface 3 was the only realistic way of reliably transferring tape software for the Spectrum onto disk for the +3. Easy to use (it just plugs into the expansion port of the +3 and operates at the touch of a button), it provides fully automatic & universal back-up/transfer of 48K/128K programs from tape to disk, disk to disk, tape to tape and disk to disk.
Also has a comprehensive toolkit to study/modify develop software, hack for extra lives etc etc.
Everything you need to start transferring your cassette software library to disk. 

Sinclair Interface 1
Weight: gKG
Larger picture 

Sinclair Interface 1

In excellent fully working condition.

Sinclair ZX Microdrive
Weight: gKG
Larger picture 

Sinclair Microdrive - fully tested and working and in cood condition

These microdrives may have some surface marks and small scratches after 20+ years of life, but are tested and fully working.

All units still have their rubber feet and base plate to attach to other microdrives.

Sinclair Microdrive - Full System
Weight: gKG
Larger picture 
Sinclair Interface 1, Microdrive and Ribbon Connector

Fully working Interface 1 (Ver 2 ROM) and Microdrive system, complete with ribbon connector and base plate for joining additional microdrives.
All in excellent condition, the Microdrive has very few marks and is still in possession of all its rubber feet.
The Interface 1 is in equally good condition, also with its feet and the screws for attachment to the Spectrum - full package.

Sinclair Interface 1 Network Connector
Weight: gKG
Larger picture 

New Sinclair Interface 1 Network Connector Lead

Extremely difficult to find and I have to say, not much use now !

But if you're trying to complete your collection, have one missing from a Sinclair Expansion pack, or if you actually have a working network of Spectrums then you might need one...

Sinclair ZX Interface 1 & Microdrive Manual
Weight: gKG
Larger picture 
Official Manual for the Sinclair Interface 1 and Microdrive

Good condition, no significant marks or tears, all pages present

Sinclair Microdrive Cartridges
Weight: gKG
Larger picture 
4 Sinclair Spectrum Microdrive Cartridges
These cartridges are used and may still have markings on them, but they have been tested and formatted ready for use on a Spectrum system (they will require re-formating if for use with a QL). They are suppplied in their original individual cases.
Please note that due to the inherent inconsistancies between Microdrives they may need to be formatted again with your particular system if they seem not to work. The read/write heads were rarely set identically on the Microdrive units and a tape which could be read without problem on one could easily give problems on another.
Sinclair ZX Interface 2 - Sinclair Spectrum
Weight: gKG
Larger picture 

ZX Interface 2 for the Sinclair Spectrum

Fully working and in good condition, has been tested with both games cartridge and joystick.

32K Blank Wafa Cartridges for the Rotronics Wafadrive
Weight: gKG

4 x 32K Wafas (cartridges) for the Rotronics Wafadrive
These cartridges are new (old stock), but because of their age, they have been tested and formatted ready for use. 

Please note that due to the inherent inconsistancies between Wafadrive units, they may need to be formatted again with your particular system if they seem not to work.  The read/write heads were rarely set identically on the Wafadrive units and a wafa which could be read without problem on one could easily give problems on another.

Sinclair Light Gun
Weight: gKG

Original Sinclair Light Gun for the Spectrum +2 and +3